15 anos ajudando empresas brasileiras
a escolherem o melhor software

Sobre Beamex CMX

O software de calibração Beamex CMX é uma solução de software avançada, porém fácil de usar, que ajuda a documentar e gerenciar a instrumentação.

Saiba mais sobre o Beamex CMX

Vantagens:

The built in help is very comprehensive and easy to use.

Desvantagens:

If I have a change on every calibration procedures. It is hard to go into every position to change on om each.

Notas do Beamex CMX

Pontuação média

Praticidade
4,4
Atendimento ao cliente
4,6
Recursos
4,4
Relação qualidade/preço
4,2

Probabilidade de recomendação

9,1/10

O Beamex CMX tem uma classificação geral de 4,6 em 5 estrelas com base em 39 avaliações de usuários no Capterra.

Você já usou o Beamex CMX antes?

Compartilhe suas experiências com outros compradores de software.

Filtrar avaliações (39)

Norman
CT Technician, EUA
Usou o software para: Mais de dois anos
Fonte da avaliação

We were the first adopter of the software in our company and have seen it grow to other sites.

5,0 há 6 anos

Vantagens:

The software is extremely configurable so the user can leverage whatever is needed from it. We are able to use it to help schedule PM's since it can be used to filter due dates in a number of ways. We now have several sites that have adopted it. Everyone is impressed with the time that can be saved in the field by setting up the calibration procedure in the software and then executing in the field with the calibrator. It is always a good thing to be ready for a visit from an inspector. The software generates nice calibration certificates which can be configured to display what you need. They can be saved off-line if needed by management. User management can be configured to limit access so a user can only access data for their site. Permissions can be managed to limit a users ability to edit certain parameters, etc. Customer support is second to none. We installed our software on a corporate server. Beamex's IT supported our IT personnel to overcome a few obstacles. It is because of that we now have a robust, dependable application with which we have had zero issues.

Desvantagens:

For all of it's positives, there are very few negatives I've encountered. User management could be enhanced so combine accessibility with permissions so a user has different permissions depending on what site he is accessing. I would like to see a way to edit a field across a range of instruments (positions) instead of having to edit each one individually. These are really wishes for the next software revision more than negatives. It's a dependable and comprehensive calibration management solution.

Dan
Instrumentation Electrician, Austrália
Usou o software para: Mais de dois anos
Fonte da avaliação

Paperless calibration has improved our calibration standards on site.

5,0 há 7 anos

Vantagens:

*Great customer support- I generally receive a reply within a few hours, considering that they are in Finland and I am in Australia! So far all issues have been resolved within a day or Two. *The built in help is very comprehensive and easy to use. *"Explorer" style interface makes operation easy and familiar. *I'm finding more functions and features everytime I use CMX. *You can enter as much or as little data/detail as you want. *It reflects well on our Instruments Dept- professional looking calibration reports with graphs, logos, exact errors/times/temps etc.

Desvantagens:

*We have had instances where our whole team has been unable to access the database for days at a time due to version discrepancies and computer failures. *Our corporate IT Dept struggle to grasp its concept. *Certificates and reports are not easily personalised/customised and not to very much extent.

Lone
calibration, Dinamarca
Usou o software para: 6 a 12 meses
Fonte da avaliação

I have worked with Beamex CMX Profesional for 8 months. Registered about 400 positions

3,0 há 7 anos

Vantagens:

When the positions have been entered, it is easy to use, highly automated. It gives a good overview

Desvantagens:

We get equipment calibrated externally and we need an option to only approve the calibration / certificate, maybe a light version. Node will not be marked red when there is something to be calibrated. Very locked database when there can only be one user per. License at a time, we could use that several could have read permissions at the same time. Our requirements for the Error Calculation Method may be "greater than" a value and this option is missing. The screen setup changes constantly. Once you have made a change and save, you will get out of position and it will be found again if multiple changes are to be made. Not possible to fill in calibration strategy during procedure creation.

Paul
Electrical & Instrument Maintenance Manager, Reino Unido
Indústria farmacêutica, 201–500 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

Upgrade from a very old version proved seamless, including IQ, OQ & PQ. Great support & training.

5,0 há 7 anos

Comentários: Traceability, Auditability great functionality when used with the BEAMEX calibrators & strong support of systems on site.

Vantagens:

Ability to trend, ease of review and ease of use for my team of Technicians. Auditors love this software so if you are using it right they have no doubt you are calibrating things right.

Desvantagens:

Cost. A legacy of many years of no upgrades, it was the first thing I wanted to implement. Future upgrades will prove much better value as we won't have to jump so many versions!

Igor
Head of Instrumentation Service Department, Sérvia
Química, 1.001–5.000 funcionários
Usou o software para: Mais de um ano
Fonte da avaliação

Overall good software, with some problems.

4,0 há 7 anos

Vantagens:

We used QD3 before CMX, so I`m, basically comparing expiriences. I like capabilities, number of tag numbers we can have in database and number of instruments under one TAG number.

Desvantagens:

We have five factories in our company and they all have many TAG numbers with same name. CMX doesn`t support two same Tag numbers (PS-1 for instance). Solution I got from support to put some charcters to differ TAGs (like _-. etc.) is not acceptable. Customization of reports is not user frendly at all. We spent hours trying to make our own report and still we got only a fragment covered.

Luis
Calibration Supervisor, Uruguai
Indústria farmacêutica, 201–500 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

A great solution!

5,0 há 7 anos

Vantagens:

- It's very easy to use. - Excellent paperless solution - Support is always online for help - A great solution for calibration of balances - Easy to mantain on day calibrations, and to print different lists - comunication with other brands

Desvantagens:

- communication with other brands should be easier (such as with BEAMEX) - I would like communication with calibrations by wifi

Mogens Frahm
Marine Engineer, Maintenance Tools and Methods Spe, França
Petróleo e energia, 11–50 funcionários
Usou o software para: Mais de um ano
Fonte da avaliação

Easy to use, great features, good filters for searching, easy to implement, Good support

4,0 há 7 anos

Comentários: Better calibration, more precise and easier overview

Vantagens:

- Easiness of implementation - Good searchability - Easy to use and overview ( you can easy find the transmitter which need to be calibrated, which have a certificate and which have been calibrated within a given period ) - Hassle free updated based on input from Hardware Calibrator Beamex MC6, no need to do anything from the user. - Customizable reports - Work completely hassle free with Beamex calibration hardware ( MC6 in our case ), import / export - Great Beamex support ( phone, email and conf. call ) during initial use and during implementation - High level support from local Danish supplier.

Desvantagens:

- Maybe the pressure switch setup can maybe look similar on the CMX software on the MC6 interface, this can be a little confusing. A small optimization point

Ashley
Analyser technician, Reino Unido
Petróleo e energia, 501–1.000 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

Great kit with great aftersales service

5,0 há 7 anos

Comentários: does exactly what it says on the label

Vantagens:

ease of use, high customisation capability, generates personalised calibration certificates that coincide with each individual piece of instrumentation.

Desvantagens:

As an every day used its difficult to find any thing I dislike with the software, I find it easy to navigate and personalise for my needs

Benjamin
Metering Technician, Noruega
Petróleo e energia, 10.000+ funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

Exceptional. I've had a great experience using this software

5,0 há 7 anos

Comentários: Easy to use calibration software. A must have to get the best out of your MC-5 calibrator.

Vantagens:

It's easy to use. Lots of functions. Gives you a good overview of all your instruments and calibration status.

Desvantagens:

Hopefully in the future the calibrators and software supports WiFi. Serial communication is a bit slow and outdated.

Alan
Quality/Technical Manager, EUA
Atacadistas, 11–50 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

CMX Review

5,0 há 7 anos

Comentários: With a few exceptions, CMX is that answer to keeping track of calibrations and creating certificates for our customers. Some additional editing functions would be nice when having to change Position information. Overall, I would highly recommend CMX.

Vantagens:

Overall ease of use.

Desvantagens:

Lack of editing capabilities.

Lubos
Head of calibration laboratory I&C, Eslováquia
Petróleo e energia, 1.001–5.000 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

Mostly is useful and does what I need, but not in 100%.

4,0 há 7 anos

Comentários: Good organisation and records about measurement units in calibration laboratory

Vantagens:

All calibrations are archived and I can easily find any information about any position. This is very useful for my work.

Desvantagens:

When interval of calibration is changed on more positions , it is not possible to do it in my place in batches

Matthew
Maintenance Quality Facilitator, EUA
Química, 201–500 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

Maintenance Quality Facilitator

4,0 há 7 anos

Comentários: CMX has greatly enhanced our record keeping for ISO instruments. We went from paper reports filled out by hand with ink pens. Our ISO Auditor was impressed with our improvement. CMX makes it easy for all of our technicians to have perfect paperwork everytime

Vantagens:

Ease of use

Desvantagens:

N/A

Ray
Calibration Tech, EUA
Alimentação e bebidas, 501–1.000 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

CMX Data Bse

5,0 há 2 anos

Comentários: We are just using the CMX data base to keep track of our certificates

Vantagens:

Easy to send calibrations to the calibrator

Desvantagens:

doesn't have the ability to select multiple instruments

Ron
Combined Cycle Tech Senior, EUA
Petróleo e energia, 11–50 funcionários
Usou o software para: Mais de um ano
Fonte da avaliação

CMX pro

5,0 há 5 anos

Vantagens:

Ease of use. Using the filter option makes it easy to find specific position ID's or any other variable. I like the lbl function as well, instead of hand-writing hundreds of calibration labels I can select which labels are needed and print to my label maker. The audit trail is a very useful tool to have for hysteresis. Having calibration certificates in an electronic storage location is better than storing a hard copy in a filing cabinet.

Desvantagens:

My least favorite thing is the limited amount of positions that we have without spending more money to increase the database.

Ingvar
Engineer Fiscal Metering, Noruega
Petróleo e energia, 10.000+ funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

A good program that suits us well.

3,0 há 7 anos

Comentários: We have standardized our certificates and collected everything that is our responsibility in one program.

Vantagens:

Easy to use. Good overview. Good access control. Easy to use with Beamex calibrators, and ok to use with other calibrators.

Desvantagens:

Some challenges with moving devices between position. PRT tool is not built into the program itself. Calibrate with footprint and MC5-IS. Hope some of these challenges become easier with the new IS calibrator that coming soon...

Chris
Chief Operator, EUA
Manutenção predial, 1.001–5.000 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

Calibration Software Made Easy

5,0 há 7 anos

Comentários: With over 2000 instruments in 2 facilities, our staff is very pleased with the CMX software. It provides us traceable documentation, trending and history which keeps us in compliance with all regulatory agencies as well as on task for our preventative and predictive maintenance programs. BEAMEX has developed the benchmark of excellence for process documenting calibration hardware and software.

Vantagens:

Accountability

Desvantagens:

Navigation could be a bit friendlier

Hakon
Director of Technical Support Services, EUA
Usou o software para: Não especificado
Fonte da avaliação

Benefits Realized Through Our CMX Calibration Software

5,0 há 10 anos

Comentários: We selected CMX several years ago for customer calibration services performed in the field on site at customer facilities on a variety of instrumentation & control systems. Our decision has resulted in the ability to test devices utilizing consistent methods regardless of individual performing tasks. This in turn has resulted in repeat and new business. Through the use of documenting process calibrators in conjunction with CMX software our customers have realized savings in O+M costs. Calibration records are easily retrieved from CMX whenever required. Cost has been a slight drawback for our organization where multiple software licenses were and are required in order to fully equip individuals with CMX PRO on individual laptops that are in use at multiple sites simultaneously on any given day. Technical support provided by vendor is excellent. CMX is very easy to use and easily learned by those having little or no experience with calibration software. CMX is modular, which enabled Spectra Automation to purchase immediate required functionality up front, while adding required additional functionality at a later date suited to our budget.

Dallas
Technical Officer, Austrália
Usou o software para: Mais de dois anos
Fonte da avaliação

Traceable calibrations and an organically grown instrument database

5,0 há 7 anos

Vantagens:

Clear information presented on the calibration sheets, Easy to use wizards for building the database and endlessly configurable testing procedures.

Desvantagens:

Sometimes there can be too many options and the testing procedures can take a bit to set up the first few times or for a new instrument.

Morten
Technician, Dinamarca
Petróleo e energia, 51–200 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

Easy to use and reliable

4,0 há 7 anos

Vantagens:

You do not have to hit the exact value: eg 25%, 50%, 75% or 100%. Beamex calculates the value itself.

Desvantagens:

Very hard to calibrate at zero when we use "calibration of read value". There will be a mistake in the calibration certificate

Sabu
Sr. Sales Engineer, Kuwait
Petróleo e energia, 51–200 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

We have a good experience and customer installation base for Beamex calibration software.

5,0 há 7 anos

Vantagens:

Reliable, friendly, easy to use without pen and paper , data logging, scheduling the work and many more.

Desvantagens:

Design and data management and calibration reviews & records and scheduling, floating server base to access multiple user.

Mikael
Automatikmekaniker, Dinamarca
Petróleo e energia, 51–200 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

reliable and easy to use

4,0 há 7 anos

Comentários: Easy to use.

Vantagens:

1. When calibrate, it calculate the error it selves. 2. You dont have to hit the exact point, ex. 25%.

Desvantagens:

When calibrate (out of reading), flow (square root) the calibration will fail in zero almost every time.

Harry
Control and Instrumentation journeyman, Reino Unido
Engenharia mecânica ou industrial, 51–200 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

The trainer had a vast knowledge of the system and made it easy to understand.

5,0 há 7 anos

Comentários: Uploading calibrations, keeping them somewhere safe, neat and tidy is now so easy because of the software.

Vantagens:

It is very user friendly and helps with many aspects of carrying out calibrations. The software allows for an organised catalogue of calibrations which is very helpful.

Desvantagens:

I honestly do not know the answer to this question, as stated before if found the software easy to use and due to the training I feel very confident when using it. All added features in the software just make for better organisation and ease when uploading calibrations.

Ján
technician for measuring and regulation, Eslováquia
Química, 201–500 funcionários
Usou o software para: Mais de dois anos
Fonte da avaliação

Easy to use and very good to work with it.

5,0 há 7 anos

Vantagens:

It´s easy and very simple to use. I can find very quickly what I need. It' working without failures. I´m very satisfied with this software.

Colin
Instrumentation Consultant, Índia
Usou o software para: Mais de dois anos
Fonte da avaliação

Very robust software

4,0 há 7 anos

Comentários: It enhances the quality of the instrumentation maintenance in our company.

Vantagens:

Easy comms with external equipment - very good audit trail function and history trends . Plant structure is very helpful in a widely spaced workforce.

Desvantagens:

nearly too much functionality - plus a few little minor grievances with having to fill in certain tabs before it can be saved - for example - you need a model module for a calibrator before it is saved.

Jody
Business Analyst, EUA
Usou o software para: Não especificado
Fonte da avaliação

Calibration with ROI

5,0 há 9 anos

Comentários: We originally installed CMX as stand-alone calibration software. The CMX software coupled with the Beamex process calibrators provide a high quality means to document and track critical calibrations. The implementation of the CMX software in conjunction with Beamex calibrators is a significant investment so ROI is critical. We recently completed a project that integrated the CMX software with our Maximo work management system. Currently our instrument techs do not touch Maximo through the entire work order life cycle. This process saves approximately 30 minutes per calibration and provides instant ROI. This system is giving back time to the end users. Great product!
Although technical support was outstanding, very little was needed.